![]() Lenovo ideapad FLEX 4 has the keyboard permanently attached to the top case. Separate the display panel from the top case. Un-route wireless card antennas from the guided path on the top case. Remove two screws securing the right display hinge. Here’s the other side of the motherboard. Separate the motherboard from the top case and remove it. Simply pull the cable out using tweezers. The keyboard backlight cable doesn’t have a lock. Pull the display cable up to unplug it from the motherboard. The display cable has a black tab on top. Lift up the locking tab to unlock the connector (red arrow) and pull the cable out. ![]() Here’s how to disconnect all flat cables. You can disconnect the CMOS battery too but I’ll leave it connected in order to keep the BIOS settings unchanged. – USB/audio/media card reader board cable (pink). Remove three screws securing the motherboard and disconnect the following color-coded cables: Remove one screw securing the wireless card and pull it out. The right display hinge is mounted right under the motherboard.ĭisconnect two antenna cables from the wireless card. ![]() In Lenovo ideapad FLEX 4 laptop the display panel can be remove only after the motherboard is removed. Lift up the DC jack from the case and remove it. Lift up the display panel (yellow arrow) just enough to access the DC jack. Remove two screws securing the left display hinge. Open the display 180 degrees and place the laptop on the desk as shown on the following picture. The DC power jack is mounted under the left display hinge. It’s routed in the guided path on the side.ĭisconnect the DC jack cable from the motherboard. It’s necessary to separate the display cable fro the fan. Lift up the cooling fan and disconnect the fan cable from the motherboard. Now you can access and remove and upgrade the memory module if necessary. There are a few clamps securing the cover. Lenovo ideapad FLEX 4 laptop has the memory module hidden under the metal cover shown on the following picture.Ĭarefully separate the memory cover from the motherboard. ![]() Upgrading this laptop with a 2.5″ solid state drive will make it much faster. The hard drive has tin foil wrapped around it. Lift up the rear side of the hard drive and pull it out of the SATA slot. Remove three screws securing the 2.5″ hard drive caddy. Remove the battery (Model Name: L15元PB0). Lift up the battery from the case and disconnect the battery cable from the motherboard. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |